Inicio - Conocimiento - Detalles

¿Cómo mantener el agua de la piscina?

Hay tres formas de limpiar la piscina:


First, getting & nbsp; the clear water by removing part or all of the debris in the swimming pool: generally, remove the visible suspended solids in the swimming pool water by physical means, like by circulating filtration and vacuum. Swimming pool vacuum is a very important work of swimming pool cleaning. The daily cleaning of swimming pool is achieved through the circulating filtration of water, but the circulating filtration can not filter out the tiny particles. At this time, we need to first sink the suspended particles into the bottom of the pool, and then use pool cleaners to conduct the suction operation. There are two kinds of swimming pool cleaners: & nbsp;Manual Pool Cleaner and Automatic Pool Cleaners. & nbsp;


En segundo lugar, podemos obtener el & nbsp; buena calidad del agua agregando nuevos componentes al agua de la piscina: por ejemplo, podemos lograr el requisito del contenido de cloro residual en el agua al poner desinfectante (ácido tricloroisocianúrico / TCCA) en la piscina y el valor de pH de control al poner copos alcalinos o carbonato de sodio. Y poner alguicidas para eliminar las algas en el agua. Estos trabajos se realizan principalmente por medios químicos - añadiendo productos químicos.


Third, it was mentioned before that sedimentation should be done before using pool cleaners: first add water treatment reagent, and then obtain the required water quality through physical means. When the water in the swimming pool can not reach the wanted pool water quality by circulation or absorption. & nbsp; the clarifier shall be put in first, and after alum and sedimentation, the pool cleaners shall be used for absorption; or the clear water clarifier (it is the clarifier without precipitation and absorption) shall be put in, and only the circulating filter equipment shall be opened for filtration after adding.


Envíeconsulta

También podría gustarte